|
 |
| Depth Measurement Method |
| |
Advantages of the machine:
- All-electronic control of the test load through DC motor, load cell and the electronics within the closed-loop control circuit.
- The CHD (Eht)testing between 0.2 to 1.6 mm is completed in approximately 1 minute.
- The workpiece neither has to be destroyed anymore, nor has it to be prepared at the cut face.
- This enables the number of random samples to be increased in series tests.
- Multiple tests on one and the same workpiece can be completed in a very short time.
- Networking with a central computer via a serial,customer-specific interface is possible at any time (ecos 002)and enables to control the heat treatment process.
- In addition the M4-EHT hardness testing machine can be used for all standardized and traditional hardness testing processes HR /HBT /HVT as well.
|
| |
|
|
